HOME > Blog >

Installation method of water filter cartridge

Author:Huamo Water treatment materials FROM:Water filter membrane manufacturer TIME:2021-11-26


    With the sustainable development of the economy and society, the problem of social pollution has become more and more serious, and water pollution has endangered our daily lives. In order to better ensure physical and mental health and the consumption of pure water, many families choose to install ro membrane filter at home, and it is necessary to install water filter cartridge. Since the packing density of this water filter cartridge is relatively high, the pressure performance is good, and the filtering accuracy is also high, the following is an explanation of how to install the water filter cartridge.

    water filter cartridge

    1. Connect the two-division valve to the tap water pipeline.Close the drinking water pipe and proceed with the installation process. First, connect the two-part seepage gate valve to the tap water pipe. It is best to wrap raw tape to prevent water leakage.
    2. One end of the PE pipe is connected to the tap water pipe, and the other end is connected to the ro membrane filter.
    During the installation process, pay attention to cater to the connection to prevent water leakage; secondly, pay attention to the length of the PE pipe, do not leave it too long or too short, it is suitable according to the specific situation.
    3. Remove the three pipe joints of the kinetic machine and connect the PE pipe.
    During the installation process, pay attention to the small dark blue buckle and the kinetic energy machine to prevent water leakage due to pressure and other factors at that time.
    4. Connect the sewage valve.
    In the whole process of connecting the sewage valve, pay attention to the length of the PE pipe. In addition, the dark blue lock must be locked when connecting to prevent water leakage.
    5. Installation of gooseneck faucet.

    When installing the gooseneck faucet, pay special attention to the fixing of the screws to prevent it from falling off in the future.

    6. Connect the purification drain of the stainless steel water filter to the gooseneck leader.
    The connection adopts a 3-point PE pipe connection. The connected PE pipe does not need to be too long. Pay attention to the connection on both sides, and there is no need to loosen the connection and cause water leakage.
    7. First look for items with water, and then open the water inlet valve for cleaning.
    During the cleaning operation, pay attention to observe the changes in the water body and check whether there is any water leakage, which needs to be solved immediately.
    8. The cleaning time is about 10-20 minutes, until clear water occurs.
    Although it was fresh water at the beginning, it is recommended that you do not drink it immediately or boil it.

    The installation of the water filter cartridge is also the main process to ensure reasonable consideration of water resources, so it is very important to learn how to install it properly.

    ro membrane filter

    About Us




    Manufacturer Address:No.6 Hengtong Rd, Shanmei Village, Xiamei Town, Nanan City, Fujian Province, China
    Sales Tel:+86 15860050575