1.FRP ro membrane housing mainly depends on the requirements of the designer. The arrangement of the membrane and the requirements of the section are different. According to the different import and export angles, it can be divided into three types: 0 degree, 90 degree, and 180 degree. It is better, but it increases the probability of water leakage from the pressure vessel.
2.The flow and pressure of the 2.8-inch membrane to water is much larger than that of the 4-inch RO membrane. If two ports are opened on the FRP Membrane Housing port, the pressure resistance of the end face will be reduced, and the installation will also increase a lot.

3. The main specifications of FRP ro membrane housing are 4 inches and 8 inches, reverse osmosis equipment parts, end caps, membrane pipe flange seals, silicone o-shaped sealing ring, good sealing performance, higher pressure resistance than clamp type, mirror polished surface, and appearance Beautiful. It is widely used in various water treatment engineering, pharmaceutical, electronic, chemical and other industries.

1.Working pressure: 300, 400,  1,000, 1,200 PSI
2.End port or side port is optional
3.Internal diameter: 112mm
4.Available lengths: 1, 2, 3, 4, 5,6,7 cores
5. Operating temperature: -7°C to 49°C
6.Standard color: white
7.Other colors also available for selection
8.Can be produced according to customer’s order

9.FRP membrane housing with all kinds of specifications for your choice.